TP-LINK JetStream TL-SG3216 TL-SG3216 Data Sheet
Product codes
TL-SG3216
Chapter 25 PoE Commands
Note: Only TL-SG3424P supports PoE function.
PoE (Power over Ethernet) technology describes a system to transmit electrical power along with
data to remote devices over standard twisted-pair cable in an Ethernet network. It is especially
useful for supplying power to IP telephones, wireless LAN access points, cameras and so on.
data to remote devices over standard twisted-pair cable in an Ethernet network. It is especially
useful for supplying power to IP telephones, wireless LAN access points, cameras and so on.
power inline consumption (global)
Description
The
power inline consumption command is used to configure the max power
the PoE switch can supply globally.
Syntax
power inline consumption power-limit
Parameter
power-limit ——The max power the PoE switch can supply, ranging from 1 to
320w. By default, the value is 320.
320w. By default, the value is 320.
Command Mode
Global Configuration Mode
Example
Configure the max power the PoE switch can supply as 160w:
TL-SG3424P(config)# power inline consumption 160
power inline disconnect-method
Description
The
power inline disconnect-method command is used to offset the power
limit being exceeded and keep the switch system using power at a usable level.
Syntax
power inline disconnect-method {deny-next-port|deny-low-priority}
Parameter
deny-next-port —— When the supply power exceeds the power limit, the PD
linked to the next port will be disconnected.
linked to the next port will be disconnected.
161