TP-LINK JetStream TL-SG3216 TL-SG3216 Data Sheet
Product codes
TL-SG3216
ipv6 mld snooping last-listener query-count
Description
The
ipv6 mld snooping last-listener query-count command is used to specify
the numbers of Specific Query Message to be sent. The default value is 2. To
restore the default number, please use
no ipv6 mld snooping last-listener
query-count command.
Syntax
ipv6 mld snooping last-listener query-count num
no ipv6 mld snooping last-listener query-count
no ipv6 mld snooping last-listener query-count
Parameter
num —— Specify the numbers of Specific Query Message to be sent, ranging
from 1 to 7.
Command Mode
Global Configuration Mode
Example
Specify the number of Specific Query Message to 3:
TL-SG3424(config)# ipv6 mld snooping last-listener query-count 3
ipv6 mld snooping multicast-vlan
Description
The
ipv6 mld snooping multicast-vlan command is used to enable the
multicast VLAN function. To disable this function, please use
no ipv6 mld
snooping multicast-vlan command. By default it is disabled.
Syntax
ipv6 mld snooping multicast-vlan
no ipv6 mld snooping multicast-vlan
no ipv6 mld snooping multicast-vlan
Command Mode
Global Configuration Mode
Example
Enable multicast VLAN:
TL-SG3424(config)# ipv6 mld snooping multicast-vlan
217