TP-LINK JetStream TL-SG3216 TL-SG3216 Data Sheet
Product codes
TL-SG3216
out (the number of LLDPDUs equals this parameter). The value ranges from 1 to
10 and the default value is 3.
10 and the default value is 3.
Command Mode
Global Configuration Mode
Example
Specify the Transmit Interval of LLDPDU as 45 seconds and Trap message to
NMS as 120 seconds:
NMS as 120 seconds:
TL-SG3424P(config)# lldp timer tx-interval 45
TL-SG3424P(config)# lldp timer notify-interval 120
lldp med-fast-count
Description
The
lldp med-fast-count command is used to configure the number of the
LLDP-MED frames that will be sent out. When LLDP-MED fast start mechanism
is activated, multiple LLDP-MED frames will be transmitted based on this
parameter. The default value is 4. To return to the default configuration, please
use
is activated, multiple LLDP-MED frames will be transmitted based on this
parameter. The default value is 4. To return to the default configuration, please
use
no lldp med-fast-count command.
Syntax
lldp med-fast-count count
no lldp med-fast-count
no lldp med-fast-count
Parameter
count —— Configure the Fast Start Count parameter. It ranges from 1 to 10. By
default, it is 4.
default, it is 4.
Command Mode
Global Configuration Mode
Example
Specify Fast Start Count as 5:
TL-SG3424P(config)# lldp med-fast-count 5
lldp receive
Description
The
lldp receive command is used to enable the designated port to receive
LLDPDU. To disable the function, please use
no lldp receive command.
252