TP-LINK 16-Port Gigabit Web Smart Switch with 2 Combo SFP Slots TL-SG2216WEB Data Sheet
Product codes
TL-SG2216WEB
Syntax
qos cos
no qos cos
no qos cos
Command Mode
Global Configuration Mode
User Guidelines
IEEE 802.1P gives the Pri field in IEEE 802.1Q tag a recommended definition.
When the mapping relation between IEEE 802.1P Priority and TC egress queue
is enabled, the data will be classified into the egress queue based on this
mapping relation.
When the mapping relation between IEEE 802.1P Priority and TC egress queue
is enabled, the data will be classified into the egress queue based on this
mapping relation.
Example
Enable the mapping relation between IEEE 802.1P Priority and egress queue:
TL-SG2452(config)# qos cos
qos dscp
Description
The
qos dscp command is used to enable the mapping relation between DSCP
Priority and CoS value. To disable the mapping relation, please use
no qos
dscp command.
Syntax
qos dscp
no qos dscp
no qos dscp
Command Mode
Global Configuration Mode
User Guidelines
DSCP (DiffServ Code Point) is a new definition to IP ToS field given by IEEE.
DSCP priorities are mapped to the corresponding 802.1p priorities. IP datagram
will be classified into the egress queue based on the mapping relation between
DSCP priority and CoS value.
DSCP priorities are mapped to the corresponding 802.1p priorities. IP datagram
will be classified into the egress queue based on the mapping relation between
DSCP priority and CoS value.
Example
Enable the mapping relation between DSCP Priority and CoS value:
TL-SG2424(config)# qos dscp
103