TP-LINK 16-Port Gigabit Web Smart Switch with 2 Combo SFP Slots TL-SG2216WEB Data Sheet
Product codes
TL-SG2216WEB
Chapter 20 PoE Commands
Note: Only TL-SG2424P supports PoE function.
PoE (Power over Ethernet) technology describes a system to transmit electrical power along with
data to remote devices over standard twisted-pair cable in an Ethernet network. It is especially
useful for supplying power to IP telephones, wireless LAN access points, cameras and so on.
data to remote devices over standard twisted-pair cable in an Ethernet network. It is especially
useful for supplying power to IP telephones, wireless LAN access points, cameras and so on.
power inline consumption (global)
Description
The
power inline consumption command is used to configure the max power
the PoE switch can supply globally.
Syntax
power inline consumption power-limit
Parameter
power-limit ——The max power the PoE switch can supply. For TL-SG2424P it
ranges from 1 to 180w and the value is 180w.
ranges from 1 to 180w and the value is 180w.
Command Mode
Global Configuration Mode
Example
Configure the max power the PoE switch can supply as 160w:
TL-SG2424P(config)# power inline consumption 160
power profile
Description
The
power profile command is used to create a PoE profile for the switch. To
delete the configured PoE profile configuration, please use
no power profile
command. PoE Profile is a short cut for the configuration of the PoE port. In a
PoE profile, the PoE status, PoE priority and power limit are configured. You
can specify a PoE profile for each PoE port individually.
PoE profile, the PoE status, PoE priority and power limit are configured. You
can specify a PoE profile for each PoE port individually.
Syntax
power profile name [ supply { enable | disable } [ priority { low | middle | high }
[
[
consumption { power-limit | auto | class1 | class2 | class3 | class4 } ] ] ]
130