TP-LINK 16-Port Gigabit Web Smart Switch with 2 Combo SFP Slots TL-SG2216WEB Data Sheet
Product codes
TL-SG2216WEB
user access-control port-based interface { gigabitEthernet port | range
gigabitEthernet port-list }
no user access-control
gigabitEthernet port-list }
no user access-control
Parameter
port —— The Ethernet port number.
port-list ——The list group of Ethernet ports, in the format of 1/0/1-4. You can
appoint 5 ports at most.
appoint 5 ports at most.
Command Mode
Global Configuration Mode
Example
Configure that only the users connected to ports 2-6 are allowed to login:
TL-SG2424(config)# user access-control port-based interface range
gigabitEthernet 1/0/2-6
user max-number
Description
The
user max-number command is used to configure the number of the users
logging on at the same time. To cancel the limit to the numbers of the users
logging in, please use
logging in, please use
no user max-number command.
Syntax
user max-number admin-num guest-num
no user max-number
no user max-number
Parameter
admin-num —— The maximum number of the users logging on as Admin,
ranging from 1 to 16. The total number of Admin and Guest should be less than
16.
ranging from 1 to 16. The total number of Admin and Guest should be less than
16.
guest-num —— The maximum number of the users logging on as Guest,
ranging from 0 to 15.The total number of Admin and Guest should be less than
16.
ranging from 0 to 15.The total number of Admin and Guest should be less than
16.
Command Mode
Global Configuration Mode
41