Intellinet 19" RJ45/SFP switch box 24 ports 1 Gbit/s 560900 Data Sheet
Product codes
560900
24-Port Gigabit Ethernet PoE+ Web-Managed
Switch with 4 SFP Combo Ports
Switch with 4 SFP Combo Ports
24 x PoE ports, IEEE 802.3at/af Power over Ethernet (PoE+/PoE), 4 x SFP, Endspan,
19" Rackmount
Part No.:
19" Rackmount
Part No.:
560900
Save Installation Time and Money with PoE
The Intellinet 24-Port Gigabit Ethernet PoE+ Web-Managed Switch with 4 SFP Combo
Ports (560900) is designed to pass both data and electrical power to a number of
PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with 24
Gigabit Ethernet ports, all of which support 802.3at/af Power over Ethernet (PoE/PoE+),
this switch can power wireless LAN access points and bridges, VoIP (Voice over Internet
Protocol) telephones, IP surveillance cameras and more while delivering network speeds of
up to 1000 Mbps.
Ports (560900) is designed to pass both data and electrical power to a number of
PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with 24
Gigabit Ethernet ports, all of which support 802.3at/af Power over Ethernet (PoE/PoE+),
this switch can power wireless LAN access points and bridges, VoIP (Voice over Internet
Protocol) telephones, IP surveillance cameras and more while delivering network speeds of
up to 1000 Mbps.
Power over Ethernet 802.3at
The Intellinet 24-Port Gigabit Ethernet PoE+ Web-Managed Switch with 4 SFP Combo Ports supports the IEEE 802.3at
protocol and is designed to inject up to 30 watts of power per port*. IEEE802.3af- or IEEE802.3at-compliant devices
attached to the switch require no additional power, thus eliminating the time and expense of electrical rewiring and
minimizing the unsightly clutter caused by power supplies and adapters in awkward places such as ceilings and walls.
Any mix of PoE and non-PoE devices is supported, and thanks to its short circuit, overload and high-voltage protection
function, your equipment is well-protected. For devices that are not 802.3at/af compliant (legacy wireless access points or
network cameras), we suggest the use of an Intellinet PoE/PoE+ Splitter.
protocol and is designed to inject up to 30 watts of power per port*. IEEE802.3af- or IEEE802.3at-compliant devices
attached to the switch require no additional power, thus eliminating the time and expense of electrical rewiring and
minimizing the unsightly clutter caused by power supplies and adapters in awkward places such as ceilings and walls.
Any mix of PoE and non-PoE devices is supported, and thanks to its short circuit, overload and high-voltage protection
function, your equipment is well-protected. For devices that are not 802.3at/af compliant (legacy wireless access points or
network cameras), we suggest the use of an Intellinet PoE/PoE+ Splitter.
Eliminate Bottlenecks With Gigabit Speeds
Equipped with 24 auto-sensing 10/100/1000 Mbps RJ45 Gigabit Ethernet ports, the 24-Port Gigabit Ethernet PoE+
Web-Managed Switch with 4 SFP Combo Ports offers plenty of performance for your computers, servers and other
networking devices. in addition, four shared combo small form-factor pluggable GBIC module slots (SFP) provide fiber
connectivity for greater distances.
Web-Managed Switch with 4 SFP Combo Ports offers plenty of performance for your computers, servers and other
networking devices. in addition, four shared combo small form-factor pluggable GBIC module slots (SFP) provide fiber
connectivity for greater distances.
Web-Management
This PoE switch is equipped with an impressive array of advanced management functions that allow you to be in full
control over your network. The 24-Port Gigabit Ethernet PoE+ Web-Managed Switch with 4 SFP Combo Ports supports
VLAN, port aggregation, QoS, port mirroring, SNMP V1 and the popular SNMP V2c, just to name a few.
control over your network. The 24-Port Gigabit Ethernet PoE+ Web-Managed Switch with 4 SFP Combo Ports supports
VLAN, port aggregation, QoS, port mirroring, SNMP V1 and the popular SNMP V2c, just to name a few.
* Total PoE budget for this switch is 360 watts. Per-port average power distribution is 15 watts; maximum per-port power
usage cannot exceed 30 watts.
Features:
Provides power and data connection for up to 24 PoE network devices
Save installation cost by delivering data and power over existing network cables
10/100/1000 auto-sensing ports automatically detect optimal network speeds
Four small form-factor pluggable GBIC module slots (SFP)
Save installation cost by delivering data and power over existing network cables
10/100/1000 auto-sensing ports automatically detect optimal network speeds
Four small form-factor pluggable GBIC module slots (SFP)
For more information on Intellinet products, consult your local dealer or visit www.intelllinet-network.com.
All names of products or services mentioned herein are trademarks or registered trademarks of their respective owners. Distribution and
reproduction of this document, and use and disclosure of the contents herein, are prohibited unless specifically authorized.