TP-LINK JetStream TL-SG1024DE Data Sheet

 

Displays the LAG number which the port belongs to. 

1.  If you enable ingress bandwidth control feature for the storm control-enabled port, storm 

control feature will be disabled for this port.   

2.  When egress bandwidth control feature is enabled for one or more ports, you are suggested 

to disable the flow control on each port to ensure the switch works normally.   

Storm Control function allows the switch to filter broadcast, multicast and UL frame in the network. 
If the transmission rate of the three kind packets exceeds the set bandwidth, the packets will be 
automatically discarded to avoid network broadcast storm. 

On this page you can configure and view the storm control function information.   

Choose the menu QoS→Storm Control to load the following page. 

 

Figure 7-6 Storm Control Setting 

The following entries are displayed on this screen: 

 

45