Manualsbrain.com
  1. Manuals
  2. Brands
  3. TP-LINK
  4. JetStream TL-SG3216
  5. Data Sheet

TP-LINK JetStream TL-SG3216 TL-SG3216 Data Sheet

Product codes
TL-SG3216
Download
Page of 240
 
2.3  Appearance Description 
2.3.1 Front Panel 
 
Figure 2-1 Front Panel 
The following parts are located on the front panel of the switch: 
¾
  10/100/1000Mbps Ports: Designed to connect to the device with a bandwidth of 10Mbps, 
100Mbps or 1000Mbps. Each has a corresponding 1000Mbps LED. 
¾
  SFP Ports: Designed to install the SFP module. TL-SG3216/TL-SG3424 switch features some 
SFP transceiver slots that are shared with the associated RJ45 ports. The associated two ports 
are referred to as “Combo” ports, which means they cannot be used simultaneously, otherwise 
only SFP ports work. TL-SG3210 features two individual SFP ports. 
Note: 
For TL-SG3216/TL-SG3424 switch, when using the SFP port with a 100M module or a gigabit 
module, you need to configure its corresponding Speed and Duplex mode on 
Switching→Port→Port Config page. For 100M module, please select 100MFD while select 
1000MFD for gigabit module. By default, the Speed and Duplex mode of SFP port is 1000MFD. 
For TL-SG3210, it only supports 1000MFD mode. 
¾
  Console Port: Designed to connect with the serial port of a computer or terminal for monitoring 
and configuring the switch. 
¾
  LEDs 
Name 
Status 
Indication 
On 
Power is on. 
Flashing 
Power supply is abnormal. 
Power 
Off 
Power is off or power supply is abnormal. 
On 
The switch is working abnormally.   
Flashing 
The switch is working normally. 
System 
Off 
The switch is working abnormally. 
On 
A 1000Mbps device is connected to the corresponding 
port. 
1000Mbps 
Off 
A 10/100Mbps device or no device is connected to the 
corresponding port. 
On 
A device is connected to the corresponding port, but not 
activity.  
Flashing 
Data is being transmitted or received.   
Link/Act 
Off 
No device is connected to the corresponding port. 
7