TP-LINK JetStream TL-SG3216 TL-SG3216 Data Sheet
Product codes
TL-SG3216
Choose the menu Maintenance→Network Diagnose→Ping to load the following page.
Figure 14-9 Ping
The following entries are displayed on this screen:
¾
Ping Config
Destination IP:
Enter the IP address of the destination node for Ping test.
Ping Times:
Enter the amount of times to send test data during Ping testing. The
default value is recommended.
default value is recommended.
Data Size:
Enter the size of the sending data during Ping testing. The default
value is recommended.
value is recommended.
Interval:
Specify the interval to send ICMP request packets. The default value
is recommended.
is recommended.
14.4.2 Tracert
Tracert test function is used to test the connectivity of the gateways during its journey from the
source to destination of the test data. When malfunctions occur to the network, you can locate
trouble spot of the network with this tracert test.
source to destination of the test data. When malfunctions occur to the network, you can locate
trouble spot of the network with this tracert test.
Choose the menu Maintenance→Network Diagnose→Tracert to load the following page.
210