TP-LINK Single Parallel Port Fast Ethernet Print Server TL-PS110P User Manual
Product codes
TL-PS110P
1
The product model shown in this QIG is TL-PS110U, as an example.
Before you start, you should prepare the following items
¾
Windows 2000/XP/2003/Vista/7 computer with print server setup CD
¾
One
Printer
¾
One Printer cable
¾
One
Router
Hardware Installation
1.
Turn off the printer’s power.
2. Connect the print server to
your printer with the supplied
printer cable. Connect the
print server to your Router
with the RJ45 cable. The
image beside is the classic
infrastructure topology for
reference:
printer cable. Connect the
print server to your Router
with the RJ45 cable. The
image beside is the classic
infrastructure topology for
reference:
3.
Turn the printer’s power on.
4.
Plug the AC power adapter into the power connector on the print server.
5.
Wait 40 seconds as part of the print server’s Power On Self Test (POST).
Factory Default Settings
¾
Username:
admin
¾
IP Address: 192.168.0.10
¾
Subnet Mask: 255.255.255.0
The TL-PS110U is produced without password by default.
Note
Note