TP-LINK 16-Port Gigabit Desktop/Rackmount Switch TL-SG1016D Data Sheet
Product codes
TL-SG1016D
4
2.3 Power On
TL-SG1016/TL-SG1024 16/24-port Gigabit Ethernet Switch is
powered by AC power supply. Powering on the Switch, it will
automatically initialize and its LED indicators should respond as
follows:
1) All of the Link/Act and 1000Mbps LED indicators will flash
powered by AC power supply. Powering on the Switch, it will
automatically initialize and its LED indicators should respond as
follows:
1) All of the Link/Act and 1000Mbps LED indicators will flash
momentarily for one second, which represent a resetting of
the system.
the system.
2) The Power indicator will light up.
If the LED indicators don't respond as described above, please
check the power supply and connection.
check the power supply and connection.
Chapter 3
Identifying External Components
This Chapter describes the front panel, rear panel and LED
indicators of the Switch. TL-SG1016 and TL-SG1024 just differ
in the number of LED indicators and ports and all figures in this
guide are of TL-SG1024.
indicators of the Switch. TL-SG1016 and TL-SG1024 just differ
in the number of LED indicators and ports and all figures in this
guide are of TL-SG1024.
3.1 Front Panel
The front panel of the TL-SG1024 consists of switch LED
indicators, 24 10/100/1000Mbps RJ-45 ports.
indicators, 24 10/100/1000Mbps RJ-45 ports.
Figure 3-1 TL-SG1024 Switch Front Panel sketch
3.2 Rear Panel
The rear panel of the TL-SG1024 only features a power
receptacle, which is an AC power receptacle. Connect the
female of the power cord head here, and the male head to the
receptacle, which is an AC power receptacle. Connect the
female of the power cord head here, and the male head to the