D-Link DES-105 DES-105/B User Manual
Product codes
DES-105/B
8
Rear Panel
Power Jack:
Power is supplied through an external power adapter. Check the
technical specification section for information about the power input
voltage.
Power is supplied through an external power adapter. Check the
technical specification section for information about the power input
voltage.
Since the DES-105/108 does not require a power button, plugging
DES-105/108 10/100Mbps Fast Ethernet Switch
its power adapter into a power outlet will immediately power it on.
Kensington Security Slot
DES-105/108 has been giving customers the best option for physical
security through a Kensington Security Slot in the rear panel. The
Kensington Security Slot adds value to DES-105/108 by offering
customers a simple, built-in security solution.
Kensington Security Slot adds value to DES-105/108 by offering
customers a simple, built-in security solution.
Grounding the Switch
This section describes how to connect the switch to ground. You
must complete this procedure before powering your switch.
Required Tools and Equipment
‧Ground screws (included in the accessory kit): One M4 x 6 mm
This section describes how to connect the switch to ground. You
must complete this procedure before powering your switch.
Required Tools and Equipment
‧Ground screws (included in the accessory kit): One M4 x 6 mm
(metric) pan-head screw
‧Ground cable (not included in the accessory kit): The grounding
cable should be sized according to local and national installation
requirements. Depending on the power supply and system, a 12 to
6 AWG copper conductor is required for U.S installation.
Commercially available 6 AWG wire is recommended. The
length of the cable depends on the proximity of the switch to
requirements. Depending on the power supply and system, a 12 to
6 AWG copper conductor is required for U.S installation.
Commercially available 6 AWG wire is recommended. The
length of the cable depends on the proximity of the switch to