Intellinet 560856 Port Network Switch 1 Gbit/s 560856 Data Sheet

 

  

Save Installation Time and Money with PoE

The Intellinet Network Solutions 8-Port PoE+ Desktop Gigabit Switch (560856) is designed
to pass both data and electrical power to a number of PoE-compatible devices via standard
Cat5e or Cat6 network cables. Equipped with eight Gigabit Ethernet ports, this switch can
power wireless LAN access points and bridges, VoIP phones, IP video cameras and more
while delivering network speeds of up to 1000 Mbps.

The Intellinet PoE+ Desktop Gigabit Switch supports the IEEE 802.3at protocol and is designed to inject up to 31.5 watts
of power per port*. IEEE802.3af- or IEEE802.3at-compliant devices attached to the switch require no additional power,
thus eliminating the time and expense of electrical rewiring and minimizing the unsightly clutter caused by power supplies
and adapters in awkward places such as ceilings and walls. Any mix of PoE and non-PoE devices is supported, and
thanks to its short circuit, overload and high-voltage protection function, your equipment is well-protected. For devices that
are not 802.3at/af compliant (legacy wireless access points or network cameras), we suggest the use of an Intellinet
PoE/PoE+ Splitter.

More often than not, a network switch does not utilize all its ports at all times. Normally, when a computer, notebook,
network printer or other network device is powered down, the switch continues to consume the same amount of power as
if it were active. Now, thanks to the new energy efficient IEEE 802.3az technology, the Intellinet 8-Port PoE+ Desktop
Gigabit Switch detects link status to all connected devices and reduces the power usage of ports not in use. In addition,
the Intellinet switch can adjust the level of power output based on the length of the network cable connected to a
particular port. With the Intellinet 8-Port PoE+ Desktop Gigabit Switch you will enjoy maximum network performance, but
when things slow down it automatically scales back power usage to conserve energy and save money.

* Total PoE budget for this switch is 63 watts. Maximum per-port power usage cannot exceed 31.5 watts on ports 1-2 or

15.4 watts on ports 1-4.

Provides power and data connection for up to four PoE network devices
Save time and money by delivering data and power via existing network cables
10/100/1000 auto-sensing ports automatically detect optimal network speeds
IEEE 802.3at/af-compliant RJ45 PoE/PoE+ output ports
Green Ethernet power-saving technology deactivates unused ports and adjusts power
levels based on the cable length
Power output up to 31.5 watts on ports 1-2 (IEEE 802.3at) or up to 15.4 watts on ports
1-4 (IEEE 802.3af)
Total power budget of 63 watts