Silex Technology WLAN receiver 1 port 54 Mbit/s 2.4 GHz Serial WLAN Device Server SX-500-1033 User Manual

                            

SX-500 User’s Guide

 

Page 

Factory Default Settings 

The Serial Server is shipped with a default configuration that will work with the most common serial-to-Ethernet and 
wireless connections.  The default settings can be changed to suit specific installation requirements via the 
ExtendView Utility, the embedded Web server, or via a Telnet connection to the Serial Server’s internal console.  The 
factory default settings can be easily restored at any time by performing a cold reset (press and hold the pushbutton 
on the device for more than five seconds). 

CHARACTER 

bits per character 

7, 8 (default) 

FLOW 

flow control 

NONE (default), Xon/Xoff, CTS/RTS 

PARITY 

parity 

NONE (default), EVEN, ODD, MARK, or SPACE 

SPEED 

baud rate (bits per second) 

300, 600, 1200, 2400, 3600, 4800, 7200, 9600 
(default), 14400, 19200, 38400, 57600, 76800, 
115200 (console port default), 230400, 460800 

STOP 

stop bits per character 

1 (default), 2 

MODE 

line mode (serial port protocol) 

232 (default), 422, 485, 485HD, Disabled 

ECABLE 

E-Cable mode (for TCP connections) 

Enable, Disable (default) 

ECADDR 

E-Cable destination IP address 

(set by user) 

ECONN 

E-Cable connection attempt time 

20 seconds 

ECPORT 

E-Cable destination IP port number 

9100 (default), or set by user