Auerswald COMfortel 2600 90117 User Manual
Product codes
90117
Commissioning
52
COMfortel 1600/2600 - Firmware Version 1.0 - Commissioning Instructions 01 08/12
1.
Switch the PC on.
2.
Insert the CD (Auerswald Mega Disk) into the CD ROM disk drive.
3.
Plug the flat USB connector on one end of the supplied USB cable into a
USB port on the PC.
USB port on the PC.
Note: Under Windows 7 you must install the USB and TAPI drivers before
you connect the telephone to the PC.
you connect the telephone to the PC.
4.
Plug the other USB connector into the USB port on the back of the system
telephone.
telephone.
Under Windows the Hardware Wizard starts automatically and helps
you install the required USB driver.
you install the required USB driver.
5.
Follow the instructions on the screen, and click on Finish after you have
installed the USB driver.
installed the USB driver.
Installing TAPI Drivers
Note: The TAPI driver enables you to use TAPI applications from the USB
port on the Auerswald USB device.
port on the Auerswald USB device.
Requirements
–
The Auerswald Mega Disk included in the package
–
Completed installation of the USB Driver
Fig. 12: Connecting the USB cable