Grandstream HT502 HANDYTONE ATA-ROUTER HT502 User Manual
Product codes
HT502
FIRMWARE VERSION 1.0.9.1 HT502 USER MANUAL Page 24 of 48
CONFIGURING THE HT502 VIA WEB BROWSER
HT502 has an embedded Web server that will respond to HTTP GET/POST requests. It also has
embedded HTML pages that allow users to configure the HT502 through a web browser such as
Mi
crosoft’s IE, AOL’s Netscape or Mozilla Firefox installed on Windows or Unix OS. (Macintosh OS is not
included).
ACCESS THE WEB CONFIGURATION MENU
The HT502 HTML configuration page can be accessed via LAN or WAN ports.
•
F
ROM THE
LAN
PORT
:
1. Directly connect a computer to the LAN port
2. Open a command window on the computer
3.
Type in “ipconfig /release”, the IP address etc becomes 0
4.
Type in “ipconfig /renew”, the computer gets an IP address in 192.168.2.x segment by
default
. You
will see the log in page of the device.
•
F
ROM THE
WAN
PORT
:
1. Follow table 4 to find the WAN side IP address.
2. Open a web browser, type in the WAN side IP address
– for example:
http://HT502-WAN-IP-Address
Note:
•
WAN side HTTP access is disabled by default for security reason. You can enable HTTP access
on the configuration page by
setting “WAN side HTTP access” to be YES.
•
Initial access to the configuration pages is always from the LAN port. The instructions are listed
above.
•
The IVR announces 12 digits IP address, you need to strip out the leading “0” in the IP address.