HP 643169-001 C User Manual

4.

(Optional) Change the Rings to Answer setting to the lowest setting (two rings).

5.

Run a fax test.

The printer automatically answers incoming calls that have the ring pattern you selected (Distinctive

Ring setting) after the number of rings you selected (Rings to Answer setting). The printer begins

emitting fax reception tones to the sending fax machine and receives the fax.

If you encounter problems setting up the printer with optional equipment, contact your local service

provider or vendor for further assistance.

Case E: Shared voice/fax line

If you receive both voice calls and fax calls at the same phone number, and you have no other office

equipment (or voice mail) on this phone line, set up the printer as described in this section.

Figure B-4

  Back view of the printer

1

Telephone wall jack

2

Use the phone cord supplied in the box with the printer to connect to the 1-LINE port.

You might need to connect the supplied phone cord to the adapter provided for your country/

region.

3

Telephone (optional)

To set up the printer with a shared voice/fax line

1.

Using the phone cord supplied in the box with the printer, connect one end to your telephone

wall jack, then connect the other end to the port labeled 1-LINE on the back of the printer.

NOTE:

You might need to connect the supplied phone cord to the adapter provided for your

country/region.

If you do not use the supplied cord to connect from the telephone wall jack to the printer, you

might not be able to fax successfully. This special phone cord is different from the phone cords

you might already have in your home or office.

2.

Do one of the following:

ENWW

Set up faxing (parallel phone systems) 117