Scythe Grand Kama Cross 2 SCKC-3000 Data Sheet
Product codes
SCKC-3000
Section 6. Accidental Release Measures
Containment/Clean up:
Observe all personal protection equipment recommendations
described in Sections 5 and 8. Wipe up or scrape up and cont ain for
salvage or disposal. Materials in contact with water, moisture, acids or
bases have the potential to generate hydrogen gas. Recovered
material should be stored in a vented container. Clean area as
appropriate since spilled materials, even in small quantities, may
present a slip hazard. Final cleaning may require use of steam,
solvents or detergents. Dispose of saturated absorbent or cleaning
materials appropriately, since spontaneous heating may occur. Local,
state and federal laws and regulations may apply to releases and
disposal of this material, as well as those materials and items employed
in the cleanup of releases. You will need to determine which federal,
state and local laws and regulations are applicable. Sections 13 and 15
of this MSDS provide information regarding certain federal and state
requirements.
Section 7. Handling and Storage
Use with adequate ventilation. Avoid eye contact. Do not take internally.
Product may evolve minute quantities of flammable hydrogen gas which can accumulate. Adequately
ventilate to maintain vapors well below flammability limits and exposure guidelines. Do not repackage. Do not
store in glass containers which may shatter due to pressure build up. Clogged container vents may increase
pressure build up. Keep container closed and store away from water or moisture.
Section 8. Exposure Controls / Personal Protection
Component Exposure Limits
There are no components with workplace exposure limits.
Engineering Controls
Local Ventilation: Recommended.
General Ventilation: Recommended.