Funai WD6D-M100 WD6DM100 Data Sheet

30

EN

When inserting a brand-new DVD-RW disc, the unit 
automatically starts to initialise the disc. DVD-RW disc will be 
formatted either video or VR mode according to the recording 
format mode setting of the unit. Before inserting a brand-new 
DVD-RW disc, you need to set the recording format to the 
desired mode. You can also manually format a DVD-RW disc 
once it has been used.

Select “DVD Menu” using [K

\ L], then press 

\OK].

Select “Format” using [K

\ L], then press 

\OK].

Select “Format Mode” using [K

\ L], then press 

\OK].

Select “Video mode” or “VR mode” using 
[K

\ L], then press [ENTER\OK].

Formatting will start.

“100%” is indicated.

• The recording format setting is effective only for DVD-RW 

discs. You cannot change the recording format for a DVD-R 
disc.

• You cannot mix two formats on one DVD-RW disc.
• If you insert a disc that has been formatted before, the 

recording format is not changed if you select another format 
in the “Setup” menu only. To reformat a disc (change disc 
format type), refer to “Reformatting a Disc Manually” on 
page 30.

You can set aspect ratio for video mode recording.

In stop mode, press [SETUP]. Select “General 
Setting” using [K

\ L], then press [ENTER\OK].

Select “Recording” using [K

\ L], then press 

\OK].

Select “Aspect Ratio (Video mode)” using 
[K

\ L], then press [ENTER\OK].

Select your desired setting using [K

\ L], then 

\OK].

• For VR mode DVD-RW disc, the image will be recorded in 

whichever the ratio that the programme you record is 
broadcasted with, regardless of the “Aspect Ratio (Video 
mode)” setting.

The unit inserts a chapter mark periodically (every 10 minutes 
by default) during recording. Using the Auto Chapter menu, 
you can set this function off or change the time period.

In stop mode, press [SETUP]. Select “General 
Setting” using [K

\ L], then press [ENTER\OK].

Select “Recording” using [K

\ L], then press 

\OK].

Select “Auto Chapter” using [K

\ L], then press 

\OK].

If you want to set “Auto Chapter” off, select 
“OFF” using [K

\ L], then press [ENTER\OK].

If you want to change the time period for “Auto 
Chapter”, select the required time period using 
[K

\ L], then press [ENTER\OK].

• The interval for auto chapter may be up to 2 minutes 

different from the time option you set.

• While recording, no more chapter mark will be added after 

coming up to the maximum chapter mark number.

If you use a DVD-RW disc, you can format the disc by 
performing “Format”. You can format DVD-RW disc for either 
video mode recording or VR mode recording.

• When you reformat the disc, the contents of the disc are 

erased.

• Make sure that the recording format is set to the desired 

mode. (Refer steps 

 to 

 in “Choosing the Recording 

Format of a Blank DVD-RW Disc” on page 30.)

Auto: It will be recorded with whichever the ratio that the 

programme you started to record is broadcasted 
with.

4:3 :

Recorded with the aspect ratio of 4:3.

16:9 : Recorded with the aspect ratio of 16:9.

E9TF0ED_EN.book  Page 30  Wednesday, March 17, 2010  1:32 PM