Funai WD6D-M100 WD6DM100 Data Sheet

35

EN

• Timer programme with an error number will be cleared once 

the entry screen for the programme is displayed.

• If there is a power failure or the unit is unplugged for more 

than 30 seconds, the clock setting and all timer settings will 
be lost.

• If a disc is not inserted or if a inserted disc is not recordable 

(finalised DVD-RW/-R, a fully recorded disc, etc.), the DVD 
on the front panel display will flash and the timer recording 
will not occur. Insert a recordable disc.

• If there is no tape or a tape with a record tab is not in the 

cassette compartment, the VCR on the front panel display 
will flash and the timer recording cannot be performed. 
Please insert a recordable tape.

• After all timer recordings have completed, if you want to play 

back or eject the recorded disc, press [TIMER SET], and 
then press [PLAY B] or [OPEN

\CLOSE EJECT A].

• The timer recording cannot be performed in DVD and VCR 

at the same time. If you set two programmings with the same 
channel and time both in DVD and VCR, the programming 
that has priority will be recorded.

• You cannot make any DVD operation during DVD timer 

recording.

• You cannot make any VCR operation during VCR timer 

recording.

• Timer recording whose recording time exceeds 12 hours 

cannot be made.

• When 2 or more programmes are overlapped, “Timer 

programme overlapped” appears, and the overlapped 
programme will be displayed in blue. To correct the timer 
programme refer to “Checking, Cancelling or Correcting the 
Timer Programming Information” on page 34.

• If the Start time is earlier and the End time is later than the 

current time, the recording will start immediately after you 
press [TIMER SET].

• If a videotape ends during the timer recording, the unit will 

automatically stop, eject the videotape, and turn itself off. To 
continue recording, insert a recordable tape.

Priority of overlapped settings
The unit records programmes according to priority if the timer 
programmes overlap.

If the starting time is same:
• The timer programming set first (PROG. 1) has priority.

When the starting time and the ending time for each 
programmes are different:
• A programme that has earlier start time has priority.

If the recording time is partially overlapped:
• The timer programming with the earlier start time (PROG. 2) 

has priority. PROG. 1 will start after PROG. 2 recording is 
complete.

If the recording time entirely overlaps:
• The shorter timer programming (PROG. 1) is not recorded.

Note for DVD recording
• If the recording time of two programmes are overlapped, or 

the End time of a programme and the Start time of another is 
same, the first 2 minutes (at the longest) of the subsequent 
programme will be cut off.

If the End time of the programme currently being 
recorded and the Start time of the subsequent 
programme are same:
• If PROG. 1 is a DVD recorded programme, the beginning of 

the PROG. 2 may be cut off.

* If the cut off time exceeds 3 minutes, the error number “E40” 

will appear in “Timer Programming” list.

E1–E22, E37–E39 Recording error

E23–E24

Unrecordable disc

E25/E51

• Copy prohibited programme
• Cannot record because of the NTSC / 

PAL-60 signal is received.

E26–E28

Copy prohibited programme

E29

Disc protected

E30

Disc full

E31

Already recorded 99 titles (video mode)

E32

Already recorded 99 titles (VR mode)

E33

Already recorded 999 chapters

E34

No space for Control Information

E35

PCA (Power Calibration Area) full

E36

Already finalised video format disc

E40

• There are some unrecorded parts due 

to the overlapped timer programmes.

• Recording did not start at the start 

time.

E41

Power failure

E42

No disc

E45

Copy prohibited programme

PROG. 2 
recording will start 
after PROG. 1 
recording is 
completed.

The first 2 minutes (at the longest) will be cut off.

The first 2 minutes (at the longest) will be cut off.

The first 2 minutes (at the longest) will be cut off.

The first 2 minutes (at the 
longest) will be cut off.*

E9TF0ED_EN.book  Page 35  Wednesday, March 17, 2010  1:32 PM