Kathrein 20210199 Data Sheet

Refer to the documentation supplied with your system for the settings for
the SCRs, frequencies and any PIN assigned to the tuner. Here, you will fi nd
a printed list showing the assignment between the various SCRs and the
respective transmission frequencies. You may not be able to freely select
the PIN for protection of individual frequencies; this also may be listed in the
documentation for the OneCable components.

Please note also that multiple receivers cannot share the same frequencies/
channels - the receivers would interfere with each other.

Do not assign the same frequencies/channels to Tuner 1 and Tuner 2.

The following on-screen display appears:

Secure channel with PIN:

If your OneCable system allows the transmission frequency to be protected by entering a PIN, this
can be done in this menu. No other receiver can then use this transmission frequency unless the PIN
is entered.

Select the setting “On”. You may then use the number pad to enter a PIN code (0-255) in the line
underneath “Tuner 1 PIN code”.

Transmission channel for Tuner 1:

Select a free available transmission
channel (SCR 0 - SCR 7).

Transmission frequency for Tuner 1:

Select here one of the free available
transmission frequencies or use the
numeric pad to input the required
frequency.

See example on the right (EXR 1581)
assignment of a transmission channel to
a transmission frequency.

Connection and set-up