Sygonix Surge protection socket strip 6 x White PG connector 33980A 33980A Data Sheet

The home technology brand for the entire house. More information at www.sygonix.com

Operating instructions
6 socket power strip
with USB power supply 

With the power strip, the loads connected to it can be turned on or off via the inbuilt 
mains switch.

The power strip must be connected to an earthed mains socket; the mains voltage 
must be 230 V/AC, 50 Hz.

The total power consumption of all connected loads may not exceed 3680 W. 

An inbuilt surge protection protects loads, connected to the power strip, against surges 
in the mains supply.

As a special feature, the power strip has two USB ports that permit appropriate equip-
ment to be supplied with power.

The product may only be used in dry, enclosed spaces.

Always observe the safety instructions included in these operating instructions. Read 
the operating manual carefully; keep it in a safe place and pass it on to other users of 
the power strip, where appropriate.

Any use, other than the one described above, may damage the product. Moreover, this 
involves hazards such as e.g. short circuit, fi re, electric shock, etc. It is not allowed to 
modify or rebuild any part of the product! 

This product complies with the applicable National and European requirements. All 
names of companies and products are the trademarks of the respective owner. All 
rights reserved.

• Power strip

• Operating instructions

The lightning symbol indicates a health hazard, e.g. electric shock.

This symbol indicates specifi c risks associated with handling, function and 
use. 

The “arrow” symbol indicates special tips and operating information.

 

 The product is only intended to be placed and used in dry, enclosed in-
door areas; it must not get damp or wet.

 

Observe the operating instructions!

•  The unauthorised conversion and/or modifi cation of the product is not 

permitted for safety and approval reasons (CE). Do not open/disassemble! 
Contains no customer-serviceable parts.

   Maintenance, adjustment or repair work may only be carried out by an ex-

pert/authorised service centre, which is familiar with the hazards involved 
and the relevant regulations.  

•  The device is designed according to safety class I. It may only be used and 

connected to an earthed mains socket.

•   The power strip is equipped with a child safety device. Only when the prongs 

of a power plug are inserted into both openings of a socket at the same 
time will the mechanism release the opening.

   Even so, be especially careful if children are around. Children cannot realise 

the danger arising from the incorrect use of electrical devices. There is a risk 
of a life-threatening electric shock!

   The product is not a toy and must be kept out of the reach of children. Posi-

tion the product so it is out of the reach of children.

•  Do not carelessly leave the packaging material lying around since this may 

become a dangerous toy for children.

•  Handle the product with care, it can be damaged by impacts, blows, or ac-

cidental drops, even from a low height. 

•   The product may only be used in dry, enclosed, indoor areas, it must not get 

damp or wet! Never place the product in the direct vicinity of a bathroom, 
shower, bathtub or similar. Lethal hazard due to electric shock!

•  The product must not be exposed to extremes of temperature, direct sun-

light or strong vibrations. 

•  Unwind the mains cable completely during use. The power cable must not 

be pinched or damaged by contact with sharp edges. Do not place any ob-
jects on the cable, and do not allow it to become kinked. Install the cable 
where no one can stumble over it and the plug is easily accessible. Do not 
install the mains cable under carpets or the like.

•  Do not operate the device in environments where there are high levels of 

dust, fl ammable gases, vapours or solvents. There is a danger of fi re and 
explosion!

•  Never plug in or unplug the product with damp or wet hands. There is a risk 

of a life-threatening electric shock!

•  Never connect the product to the power supply immediately after it has 

been brought from a cold room into a warm one (e.g. during transport). 
The condensation that develops in such cases could damage the device or 
cause an electric shock! Allow the product to reach room temperature. Wait 
until the condensation has evaporated. This might take several hours. Only 
after this should the product be plugged in to the mains and put into use.

•  Always unplug the mains plug using the gripping surface intended for this 

purpose. Never unplug the mains plug from the socket by pulling on the 
cable!

•   Do not overload the power strip. Observe the connected load in the chapter 

“Technical Data”.

•   Do not connect in series! This can lead to overloading of the power strip! Fire 

hazard!

   Plug the power strip's earthed mains plug directly into a wall outlet, for 

example. Do not connect one power strip to another.

•  Do not operate while covered! At higher connected loads, the power strip 

and the connection cable heat up, which could lead to overheating and fi re 
if covered!