Unold 8865 Data Sheet
15
clEANINg AND cARE
1.
switch off the appliance and disconnect the
plug from the outlet.
2. Do not use any sharp or scouring cleansers
which might damage the surface.
3. Do not immerse the motor block into water.
Wipe it with a damp cloth and dry it with a
soft cloth. Take care that no water penetrates
into the motor block.
4. Empty the jug before disassembling and
cleaning it.
5. You may clean the jug and the knife easily
by using the quick break switch. Fill some
warm water and some drops of a mild
cleanser into the jug and operate the quick
break switch for a few seconds. Rinse with
clear water.
6. Optionally you can disassemble the jug for
cleaning.
7. Disassemble the jug base (see „Assembly“,
in reversed order).
8. All detachable parts of the jug assembly can
be cleaned in warm soapy water.
9.
caUtIoN!
The knife is extremely sharp, be careful
The knife is extremely sharp, be careful
when handling and cleaning it.
10. Strong odours from onions or garlic can be
removed with lemon juice.
11. All parts must be dried completely before
reassembling the jug.
P = quick break switch
for crushing of ice
for rapid powerful mixing
for crushing of ice
for rapid powerful mixing
2. The quick break switch does not click it, but
has to be held during operation. As soon as
it is released the motor stops. Only use it in
short intervals of 5 to 10 seconds.
3. After use switch to OFF position and take
the plug out of the socket.
4. To unlock turn the jug assembly counter-
clockwise and take it off.
5. In general all ingredients are given into the
jug at one time.
6. In case of large quantities, mix in several
steps one by one.
7. Solid ingredients such as cheese or
vegetables should be cut into pieces before
adding it.
8. If not provided otherwise in the recipe, add
first the liquid ingredients and then the
solid ingredients. Due to the liquid the food
can be processed more rapidly and on a
lower speed.
9. We recommend to blend in short intervals
of 5-30 seconds, and then to check the
consistency of the processed food.
10. Do not run the mixer for a long time without
interruption (max. 5 minutes). Then the
appliance has to cool down for 5-10 minu-
tes.
11. Only use the blender with the lid in place.
Hold the lid firmly pressed down with your
hand during operation.
12. Additional liquids and other ingredients can
be added through the opening in the lid.
Please be careful: the content may splash
out.
13. Be extremely careful when processing hot
ingredients.
14. When processing solid ingredients we
recommend to the use the quick break
switch several times. This avoids the knife
from getting blocked.
15. Do not take off the jug assembly before
the motor has completely stopped. When
adding warm ingredients, please put your
hand on the lid of the appliance in order
to prevent the lid from coming off and the
mixture from spilling.
crushing of ice
16. You can crush the ice cubes directly. For
rapid crushing we recommend to fill first a
small amount of water into the glass jug and
then to add the ice cubes.
17. Fill the ice cubes into the jug or add it one
by one through the opening in the lid.
18. Press the quick break switch several times,
until the ice is sufficiently crushed.