Rolux LED outdoor floodlight 12 W Warm white 3008151001 Black 3008151001 Data Sheet
Product codes
3008151001
(GB) OPERATING INSTRUCTION
WWW.ROLUX-LEUCHTEN.DE
LED-Floodlight 12W
Model nr: DF-51001
black
3008151001
Model nr: DF-51001
white
3008151002
Please read the instructions before you mount the LED-Floodlight!
Contents
1x LED-Floodlight 12W
2x
Allen key
Operating Instruction
Intended Use
The LED-Floodlight is intended for illuminating driveways, house
entrances, garages, on Facades, etc.
entrances, garages, on Facades, etc.
The LED-Floodlight may be used outdoors and indoors.
Any other use than that described above may damage the product.
All components of the Floodlight have been EMC tested and meet
the requirements of current European and national directives. CE
conformity has been proven and the respective declarations have
been deposited with the importer.
the requirements of current European and national directives. CE
conformity has been proven and the respective declarations have
been deposited with the importer.
The guarantee is rendered invalid when damage occurs as a result of non-
compliance with the operating instruction! We do not assume any liability
for any damage arising as a consequence!
compliance with the operating instruction! We do not assume any liability
for any damage arising as a consequence!
We do not assume any liability for material and personal damage caused
by improper use or non-compliance with the safety instruction. Any
warranty claim will be invalid in such cases!
by improper use or non-compliance with the safety instruction. Any
warranty claim will be invalid in such cases!
The unauthorized conversion and/or modification of the product is
inadmissible because of safety and approval reasons (CE). Never
dismantle the product.
inadmissible because of safety and approval reasons (CE). Never
dismantle the product.
The design of the product complies with protection class I. The
protective earth conductor must be connected.
protective earth conductor must be connected.
The product is suitable for outdoor use (IP65). However, it must never
be used in or under water.
be used in or under water.
Never look, directly or indirectly, into the light from the Illuminations,
the high intensity light may cause eyes injuries.
the high intensity light may cause eyes injuries.
Do not expose the product to strong mechanical stress. Do not expose it
to high (>50°C) or low (<-30°C) temperatures, strong vibrations or direct
sunlight.
to high (>50°C) or low (<-30°C) temperatures, strong vibrations or direct
sunlight.
INSTALLATION NOTES
The product may only be installed by a qualified technician (e.g.
electrician) who is familiar with the relevant regulations (e.g.VDE,
German electrical wiring regulations).
electrician) who is familiar with the relevant regulations (e.g.VDE,
German electrical wiring regulations).
Improper work, carried out on the mains voltage, endangers not only
your own life but also the life of others.
your own life but also the life of others.
Without fail, pay attention to the correct mounting position of the LED
spotlight; only install it with the connection cable, and the cable gland
respectively pointing downwards.
spotlight; only install it with the connection cable, and the cable gland
respectively pointing downwards.
Mounting
1. When using on a normal flammable surface, please follow the
instructions as per illustrations 1-2.
Illustration 1
Illustration 2
2. Install the mounting bracket for the LED-Floodlight using two
screws with a max. Diameter of 8mm. The screws should be
tightened with a torque of 11 Nm. For easier installation, the
mounting bracket can be removed from the LED-Floodlight.
tightened with a torque of 11 Nm. For easier installation, the
mounting bracket can be removed from the LED-Floodlight.
3. There must be a min. gap of 0.2m between the LED-Floodlight
and the area to be illuminated.
4. The protective panel must be replaced soon as it becomes
damaged or broken, and before it is used again. On replacing the
protective panel, please take care that the rubber seal is not
squashed.
protective panel, please take care that the rubber seal is not
squashed.
Connection and initial start-up
Connect the LED-Floodlight to a proper mains power socket
(230V/50Hz) via mains plug.
(230V/50Hz) via mains plug.
Care and maintenance
Turn off the Lamp before clean and disconnect it from the
power supply (Pull the Power Plug)!
power supply (Pull the Power Plug)!
Apart from occasionally cleaning the product, it is maintenance free, never
decompose the product.
decompose the product.
You should occasionally clean dust and dirt off the glass plate on the light, to
ensure proper functioning.
ensure proper functioning.
The exterior of the LED Floodlight should only be wiped with a clean, soft,
dry cloth. Where it becomes very dirty, use a cloth which is lightly
moistened with water.
dry cloth. Where it becomes very dirty, use a cloth which is lightly
moistened with water.
Do not use aggressive cleaning agents or chemical solutions that could
damage the housing (discolouring).
damage the housing (discolouring).
Disposal
When the product is no longer usable, dispose it in accordance
with the applicable statutory regulations.
Technical Data
Operating voltage:
230V/50Hz
Power:
12W
Protection class:
I
Protection type
IP65
Light colour:
Warm white 3.000K
Luminous flux:
ca. 1.000lm
Illumination angle of the beam:
80°
Ambient temperature:
-30C° - 50°C
Width (without mounting bracket):
142mm
Height (without mounting bracket):
180mm
Depth (without mounting bracket):
29mm