Nkk Switches Toggle switch 28 V DC/AC 0.1 A 1 x On/On latch 1 pc(s) G12JPC Data Sheet

Indicators

Accessories

Supplement

Tactiles

Keylocks

Rotaries

Pushbuttons

Illuminated PB

Slides

Programmable

Rockers

Touch

Tilt

 

A

Toggles

General 

Specifications

Logic Level: 

  0.4VA maximum @ 28V AC/DC maximum

 

  (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)

 

  Note:  Find additional explanation of operating range in Supplement section.

Contact Resistance:   80 milliohms maximum

Insulation Resistance:  500 megohms minimum @ 500V DC

Dielectric Strength:  500V AC minimum for 1 minute minimum 

Mechanical Life:  100,000 operations minimum 

 

Electrical Life:  100,000 operations minimum 

 

  10,000 operations minimum @ 0.1A @ 28V AC/DC

 

Nominal Operating Force:  1.30N 

 

 

Angle of Throw:    28°  

 

Actuator:  Polyamide 

 

Case:  Glass fiber reinforced polyamide

 

Sealing Rings:  Nitrile butadiene rubber 

Movable Contacts:  Phosphor bronze with gold plating

Stationary Contacts:  Phosphor bronze with gold plating 

 

Base:  Glass fiber reinforced polyamide 

 

 

Power Terminals:  Phosphor bronze with gold plating 

 

Lamp Terminals:  Phosphor bronze with gold plating 

 Operating Temperature Range:  –25°C through +55°C (–13°F through +131°F)
 

Humidity:   90 ~ 95% humidity for 240 hours @ 40°C (104°F)

Vibration:  10 ~ 500Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range  

 

  & returning in 1 minute; 3 right angled directions for 2 hours

Shock:  50G (490m/s

2

) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)

 

Soldering:   Wave Soldering recommended.  See Profile A in Supplement section.  

 

  Manual Soldering: See Profile A in Supplement section.  

 

 

 

Cleaning:  Automated cleaning.  See Cleaning specifications in Supplement section.

 

  The G Series toggles have not been tested for UL recognition or CSA certification. 

 

  These switches are designed for use in a low-voltage, low-current, logic-level circuit. 

 

  When used as intended in a logic-level circuit, the results do not produce hazardous energy.