Intel Celeron D 345 NE80546RE083256 User Manual

89

The Celeron D processor will also be offered as an Intel boxed processor. Intel boxed 

processors are intended for system integrators who build systems from baseboards and 

standard components. The Boxed Celeron D processor will be supplied with a cooling 

solution. This chapter documents baseboard and system requirements for the cooling 

solution that will be supplied with the boxed Celeron D processor. This chapter is 

particularly important for OEMs that manufacture baseboards for system integrators. 

Unless otherwise noted, all figures in this chapter are dimensioned in millimeters and 

inches [in brackets]. 

 shows a mechanical representation of a boxed Celeron 

D processor.

• Drawings in this section reflect only the specifications on the Intel boxed processor 

product. These dimensions should not be used as a generic keep-out zone for all 

cooling solutions. It is the system designers’ responsibility to consider their 

proprietary cooling solution when designing to the required keep-out zone on their 

system platforms and chassis. Refer to the appropriate processor Thermal and 

Mechanical Design Guidelines (see 

) for further guidance. Contact your 

local Intel Sales Representative for this document.

NOTE: The airflow of the fan heatsink is into the center and out of the sides of the fan heatsink.

This section documents the mechanical specifications of the boxed Celeron D processor. 

The boxed processor will be shipped with an unattached fan heatsink. 

 shows 

a mechanical representation of the boxed Celeron D processor.