TE Connectivity D-SUB pin strip Number of pins: 78 Crimp 1 pc(s) 5748477-1 Information Guide

Product codes

5748477-1

408- 9381

Rev C

of 2

CONTACT

WIRE SIZE

INSULATION

PIN CONTACT NUMBER

SOCKET CONTACT NUMBER

CONTACT

TYPE

WIRE SIZE

RANGE, AWG

INSULATION

DIA. RANGE

STRIP

High Density 22

28 to 22

0.76--1.02

[.030--.040]

1658670--1, --3

1658670--2, --4

1658686--1, --3

1658686--2, --4

Figure 2

3.3. Contact Insertion and Extraction

Insertion/Extraction Tool 91285--1 is designed for

the installation and removal of contacts used in

AMPLIMITE HDP--22 Connectors. For detailed

information on use of the tool, refer to Instruction

Sheet 408--9404 which is packaged with the tool.

After contacts have been crimped to wires, insert

contacts into the BACK of the connector until they

snap--lock into place. Pull back lightly on each wire to

make sure that the contact is fully seated. If all

cavities are not used, TE suggests that contacts be

evenly distributed throughout the connector.

Damaged product should not be used. If

damaged products are evident, they should be

replaced with new ones.

4. HARDWARE

AMPLIMITE HDP--22 plugs and receptacles will

accept all AMPLIMITE HD--22 and HD--20 external

hardware designed for the same shell size. For

detailed information regarding the description and

application of the hardware, refer to Catalog 82068

and Application Specification 114--10001.

5. PANEL CUTOUT

Refer to Application Specification 114--10001 for

cutout dimensions and clearance requirements

for AMPLIMITE HDP--22 Connectors.

AMPLIMITE HDP--22 connectors are designed for

rack and panel applications. Plugs are mounted in the

panel, and receptacles in the rack. Before making the

panel cutout, determine the shell size of the

connector (number of positions and rows), mounting

requirements (FRONT or REAR), and the type of

locking device (cable clamp or slide latch) for the

application. Then, using the appropriate dimensions,

make the panel cutout.

6. REVISION SUMMARY

Revisions to this instruction sheet include:

Updated document to corporate requirements.

NOTE