TE Connectivity D-SUB pin strip Number of pins: 26 Crimp 1 pc(s) 1658671-1 Information Guide

Product codes

1658671-1

Instruction Sheet

AMPLIMITE* HDP- 22 Connectors

(Plugs and Receptacles)

408--9381

LOC B

of 2

2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company

TE logo is a trademark.

*Trademark. Other product names, logos, or company names might be trademarks of their respective owners.

TOOLING ASSISTANCE CENTER 1--800--722--1111

PRODUCT INFORMATION 1--800--522--6752

This controlled document is subject to change.

For latest revision and Regional Customer Service,

visit our website at www.te.com

10 Mar 11 Rev C

with Crimp- Type Contacts

Figure 1

SHELL

SIZE

NO. OF

POSN

PLUG

PART NUMBER

RECEPTACLE

PART NUMBER

1
2
3
4
5

15
26
44
62
78

748364--1

1658671--1
1658672--1
1658673--1
1658674--1

1658681--1
1658682--1
1658683--1
1658684--1
1658685--1

Nylon

Insert

HDP--22 Receptacle

Connector (Typ)

Nylon

Insert

Steel Shell

Numbered End

Circuits

HDP--22 Plug

Connector (Typ)

Grounding

Indents

Steel Shell

NOTE: Connectors with clinch nuts, assembled in the same

manner as those shown in these instructions, are also available.

1. INTRODUCTION

This instruction sheet covers basic assembly

procedures for AMPLIMITE High Density (HDP--22)

plug and receptacle connectors listed in Figure 1.

Read these instructions and other references

carefully before assembling any connectors.

Dimensions in this instruction sheet are in

millimeters [with inches in brackets]. Figures are

for reference only and are not drawn to scale.

Reasons for reissue are provided in Section 6,

REVISION SUMMARY.

2. DESCRIPTION

AMPLIMITE HDP--22 plugs and receptacles feature

tin--plated steel shells and black nylon inserts with

plastic contact retention tines. Plug housings also

feature grounding indents. Housings are designed for

rear insertion and extraction of precision--formed,

crimp--type Size 22 contacts: pin contacts for plug

housings and socket contacts for receptacles. End

cavities at each contact row are number coded

(FRONT and BACK) to aid in contact location.

Note that each HDP--22 plug connector can be mated

to any HD--22 receptacle connector having the same

shell size.

3. ASSEMBLY PROCEDURE

3.1. Contact and Wire Selection

Refer to the chart in Figure 2 and select the correct

contact type (pin or socket) and form (strip or loose

piece). Make sure that the wire size (AWG) and

insulation diameter for the application are within the

acceptable ranges shown in Figure 2. Strip wires 5/32

3.96 [.156]. Do NOT cut or nick the conductor.

3.2. Crimping Contacts

Strip--form contacts are designed for crimping with

semi--automatic or automatic machines and

applicators. Consult your local TE Sales or Field

Representative concerning the machine and

applicator for a specific application and production

level.

Loose--piece contacts (LP) listed in Figure 2 are

designed for crimping with Hand Crimping Tool

91520--1. Refer to Instruction Sheet 408--8547, which

is packaged with the tool, for specific contact crimping

procedures.

NOTE