Jst 800140 XHP-4 Casing Series XH Grid pitch: 2.5 mm Number of pins: 4 Nominal current: 3 A 800140 Data Sheet
Product codes
800140
38
5
J S
T
1
The XH connector was developed based
on the high reliability and versatility of our
NH series connectors. The connector is very
small with a mounting height of 9.8mm.
on the high reliability and versatility of our
NH series connectors. The connector is very
small with a mounting height of 9.8mm.
Specifications –––––––––––––––––––
• Current rating:
3A AC, DC (AWG #22)
• Voltage rating:
250V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/10m
Ω max.
After environmental testing/20m
Ω max.
• Insulation resistance:
1,000M
Ω min.
• Withstanding voltage:
1,000V AC/minute
• Applicable wire: AWG #30 to #22
• Applicable PC board thickness: 1.6mm
* Compliant with RoHS.
* Refer to "General Instruction and Notice when using
• Applicable PC board thickness: 1.6mm
* Compliant with RoHS.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ––––––––––––––––––––––
0
Recognized E60389
1
Certified LR20812
2
J50014297
XH
CONNECTOR
2.5mm pitch/Disconnectable Crimp style connectors
Radial Tape
Emboss Tape
2.5
± 0.05
（2.5
min
）
（3.4
min
）
5.75
7.0
9.8
:φ 1.0
± 0.05
＋ 0.1
0
3 to 20 circuits
:φ 0.9
2 circuits
2.5
±0.05
（2.5
min
）
（9.2
min
）
φ0.9
＋0.1
0
14.3
11.5
6.1
Top entry type
Side entry type
2.5
±0.05
2.5
min
3.4
min
2.0
±0.05
1.60
±0.05
5.75
7.0
9.8
＋0.2
0
±0.05
2 circuits
:φ1.0
3 to 20 circuits
:φ0.9
＋0.1
0
φ1.1
±0.05
4.35
φ0.9
＋0.1
0
φ1.7
＋0.1
0
Top entry type with a boss
0.2
3.9
11.0
6.5
1.8
2.3
2.5
1.3
End face of wafer
on the mating side
on the mating side
〈Through-hole type (viewed from soldening side)〉
Note: 1. Tolerances are non-cumulative:
±0.05mm for all centers.
2. The dimensions above should serve as a guideline. Contact JST for details.
• Original folded beam contact
• Box-shaped shrouded header
• Header with a boss
• Interchangeability
• Conforming to the HA terminal
• Box-shaped shrouded header
• Header with a boss
• Interchangeability
• Conforming to the HA terminal
(1 circuit)
(2 circuits or more)
Note: 1. Tolerances are non-cumulative:
±0.05mm for all centers.
2. Hole dimensions differ according to the kind of PC board and piercing method. If PC boards made of hard material are used, the hole dimensions
should be larger. The dimensions above should serve as a guideline. Contact JST for details.
Side entry type
PC board layout and Assembly layout
〈SMT type (viewed from component side)〉