Nichia SMD LED non-standard Warm white 5400 mcd 120 ° 50 mA 2.9 V NESL157BT Data Sheet

Product codes
NESL157BT
Page of 17
NICHIA STS-DA1-1976A <Cat.No.120213> 
 
16
(8) Eye Safety 
  ● In 2006, the International Electrical Commission (IEC) published IEC 62471:2006 Photobiological safety of lamps 
      and lamp systems, which added LEDs in its scope.   
      On the other hand, the IEC 60825-1:2007 laser safety standard removed LEDs from its scope.   
      However, please be advised that some countries and regions have adopted standards 
      based on the IEC laser safety standard IEC 60825-1:20112001, which still includes LEDs in its scope.   
      Most of Nichia's LEDs can be classified as belonging into either the Exempt Group or Risk Group 1.   
   High-power LEDs, that emit light containing blue wavelengths, may be classified as Risk Group 2.   
      Please proceed with caution when viewing directly any LEDs driven at high current, or viewing LEDs   
      with optical instruments which may greatly increase the damages to your eyes. 
  ● Viewing a flashing light may cause eye discomfort. When incorporating the LED into your product,   
   please be careful to avoid adverse effects on the human body caused by light stimulation. 
 
(9) Others 
  ● The LEDs described in this brochure are intended to be used for ordinary electronic equipment (such as office equipment,   
   communications equipment, measurement instruments and household appliances).  
   Consult Nichia's sales staff in advance for information on the applications in which exceptional quality   
      and reliability are required, particularly when the failure or malfunction of the LEDs may directly jeopardize life or   
      health (such as for airplanes, aerospace, submersible repeaters, nuclear reactor control system, automobiles,   
      traffic control equipment, life support systems and safety devices). 
  ● The customer shall not reverse engineer by disassembling or analysis of the LEDs without having prior written consent   
      from Nichia. When defective LEDs are found, the customer shall inform Nichia directly before disassembling or analysis. 
  ● Both the customers and Nichia will agree on official specifications of supplied products before a customer's volume production. 
  ● Specifications and appearance subject to change for improvement without notice.