Panasonic Limit switch 250 Vac 5 A Tappet momentary AZH1031CEJ IP64 1 pc(s) AZH1031CEJ Data Sheet
Product codes
AZH1031CEJ
28
CAUTIONS
Die cast case
1) Do not expose HL limit switch to hot
water (over 60°C
1) Do not expose HL limit switch to hot
water (over 60°C
140°F
) and in a water
vapor environment.
2) Avoid the place where organic sol-
vents, strong acid, strong alkali liquid
and vapor may attach to the products
directly. Prevent using the HL limit switch
in place where inflammable or corrosive
gas will be generated.
2) Avoid the place where organic sol-
vents, strong acid, strong alkali liquid
and vapor may attach to the products
directly. Prevent using the HL limit switch
in place where inflammable or corrosive
gas will be generated.
Plastic case
1) Do not use in water or oil. Do not
place the switch where it is always
exposed to water or dust splash.
2) Do not expose HL limit switch to hot
water (over 60°C
1) Do not use in water or oil. Do not
place the switch where it is always
exposed to water or dust splash.
2) Do not expose HL limit switch to hot
water (over 60°C
140°F
) and in a water
vapor environment.
3) Avoid the place where organic sol-
vents, strong acid, strong alkali liquid
and vapor may attach to the products
directly. Prevent using the HL limit switch
is place where inflammable or corrosive
gas will be generated.
3) Avoid the place where organic sol-
vents, strong acid, strong alkali liquid
and vapor may attach to the products
directly. Prevent using the HL limit switch
is place where inflammable or corrosive
gas will be generated.
3) Do not change the operating position
by bending the actuator.
4) If OT is too big, the life of limit switch
will be shortened by switching friction.
Use it with enough margin of OT. 70% of
OT standard value will be good.
5) Attach the terminal cover securely to
the body with the metal stop latch to the
projection of the body.
by bending the actuator.
4) If OT is too big, the life of limit switch
will be shortened by switching friction.
Use it with enough margin of OT. 70% of
OT standard value will be good.
5) Attach the terminal cover securely to
the body with the metal stop latch to the
projection of the body.
6) Confirmation test in the actual applica-
tion is highly recommended.
7) Do not use the switch in a silicon
atmosphere. Care should be taken
where organic silicon rubber, adhesive,
seling material, oil, grease or lead wire
generates silicon.
tion is highly recommended.
7) Do not use the switch in a silicon
atmosphere. Care should be taken
where organic silicon rubber, adhesive,
seling material, oil, grease or lead wire
generates silicon.
4) Do not change the operating position
by bending the actuator.
5) If OT is too big, the life of limit switch
will be shortened switching friction. Use it
with enough margin of OT. 70% of OT
standard value will be good for use.
6) Attach the terminal cover securely to
the body to the extent you can identify
the clicking or locking sound.
7) A confirmation test in the actual appli-
cation is highly recommended.
by bending the actuator.
5) If OT is too big, the life of limit switch
will be shortened switching friction. Use it
with enough margin of OT. 70% of OT
standard value will be good for use.
6) Attach the terminal cover securely to
the body to the extent you can identify
the clicking or locking sound.
7) A confirmation test in the actual appli-
cation is highly recommended.
8) Do not use the switch in a silicon
atmosphere. Case should be taken
where organic silicon rubber, adhesive,
sealing material, oil, grease or lead wire
generates silicon.
atmosphere. Case should be taken
where organic silicon rubber, adhesive,
sealing material, oil, grease or lead wire
generates silicon.
HL (AZH)
04/2005