Graupner Hendheld RC 2.4 GHz No. of channels: 5 33110 User Manual
Product codes
33110
84
Operating Notes
Operating Notes
Converting the dual-axis stick units
Self-centring action
Either or both sticks can be converted from self-neutrali-
sing to non self-neutralising action: start by opening the
transmitter as described on the previous page.
If you wish to change the standard stick unit arrange-
ment, start by locating the screw on the left-hand stick
unit shown circled in white in the photo below.
Either or both sticks can be converted from self-neutrali-
sing to non self-neutralising action: start by opening the
transmitter as described on the previous page.
If you wish to change the standard stick unit arrange-
ment, start by locating the screw on the left-hand stick
unit shown circled in white in the photo below.
Note:
The right-hand stick unit is of mirror-image construction,
i. e. the screw you require is located on the right, below
centre.
The right-hand stick unit is of mirror-image construction,
i. e. the screw you require is located on the right, below
centre.
Turn this screw clockwise until the stick on that side
moves freely from one end-stop to the other; alterna-
tively unscrew it until the stick is fully self-centring again.
moves freely from one end-stop to the other; alterna-
tively unscrew it until the stick is fully self-centring again.
Charge socket
Brake springs
Adjuster screws
Brake springs
Adjuster screws
folding areal
Self-centring screw
Self-centring screw
Adjuster screws for stick centring force
Do not touch trans-
Do not touch trans-
mitter circuit board
mitter circuit board
D
o
no
t t
ou
ch
tr
an
s-
Do not touch tr
ans-
m
itt
er
c
irc
ui
t b
oa
rd
mitter circuit board
Left-hand stick unit
Left-hand stick unit
Right-hand stick unit
Right-hand stick unit