Tascam DR-1 User Manual

TASCAM DR-100MKII

3  Press the ENTER/MARK button to start formatting.
4  When formatting ends, the Home Screen opens.
  You can also reformat the card in this unit at any

time. (See “Using QUICK FORMAT” on page 50 and

“Using FULL FORMAT” on page 50.)

Using the built-in speaker

Set the SPEAKER switch on the bottom panel to ON to
listen to a playing track through the built-in speaker.

NOTE

Even when ON, no sound is output during recording, in
recording standby or when headphones are connected.

Connecting monitors and

headphones

To listen with headphones, connect them to the
connector on the left side panel.
To listen with an external monitoring system (powered
monitor speakers or amplifier and speakers), connect it to
the LINE OUT connector on the left side panel.

Powered monitor speakers

or amplifier and speakers

Headphones

Mode selection

You can set the operation mode used for recording and
playback.

Setting the mode

1 While pressing the ENTER/MARK button press the

button to turn the power ON and open the

MODE

SELECT

screen.

STD (default)
Standard mode for using WAV files with sampling
frequencies of 44.1 or 48 kHz and MP3 files
HS
Mode for using WAV files with sampling frequencies of
44.1, 48 or 96 kHz

2 Use the wheel to select the mode to use, and press

the ENTER/MARK button to confirm the setting.
The unit will start in the selected mode.

NOTE

The selected mode setting is retained and will be used the
next time the unit power is turned ON.

Confirming the mode

You can confirm the set mode by checking the icon on the
Home Screen. When set to STD mode the

icon appears,

and when set to HS mode, the

icon appears.

Home Screen when set to STD mode

Home Screen when set to HS mode

When set to HS mode,

HS MODE

appears in a popup when

the unit is started up.

3 – Preparation for Use