Futaba Hendheld RC 2.4 GHz No. of channels: 14 1-F8075 Data Sheet

 Move the cursor to the [MODE] item and

touch the RTN button to switch to the data

input mode.

 Select the mode by scrolling the touch sensor

and touch the RTN button.

 [UP]: Up timer
 [DOWN]: Down timer
 [HOUR]: Hour mode timer

 Move the cursor to the [ALARM] item and

touch the RTN button to switch to the data

input mode.

 Set the time by scrolling the touch sensor.
 [00]:[00]:[min]:[sec]
 Touch the RTN button to end the adjustment

and return to the cursor mode.

 Move the cursor to the item of the switch you

want to set, access the switch setup screen

by touching the RTN button. Select the switch

and ON direction.

[For a detailed description of the setting method, see [Switch 

Setting Method] located on the next page.]

 [START]: Start switch
 [STOP]: Stop switch
 [RESET]: Reset switch

 Move the cursor to the [MEMORY] item and

touch the RTN button to switch to the data

input mode.

 Select the mode by scrolling the touch sensor

and touch the RTN button.

 [OFF]: Memory function OFF
 [ON]: Mode where the timer is not reset when

turned power off and switched the model.

 Change the setting using the "" button (or

"" button).

"":  Alarm  sounds  each  minute  of  the  time

elapsed  from  timer  start.  (Conventional

mode)

"":  Alarm  sounds  each  minute  of  the  time

remaining up to the alarm time.

●  Timer ST1 and ST2 are started/stopped by

pre-selected start/stop switch.

●  To reset a timer, operate the pre-selected

reset switch, or move the cursor to the [RESET]

display on the timer screen and touch the

RTN button.