Futaba Hendheld RC 2.4 GHz No. of channels: 14 1-F8075 Data Sheet
Product codes
1-F8075
51
<Functions of System Menu>
TRAINER
Trainer system starting and setting
T14SG trainer system makes it possible for the
instructor to chose which channels and operation
modes that can be used in the students transmitter.
The function and rate of each channel can be
set, the training method can also be matched to
the student's skill level. Two transmitters must be
connected by an optional Trainer Cord, and the
Instructors’ transmitter should be programmed for
trainer operation, as described below.
When the Instructor activates the trainer switch,
the student has control of the aircraft (if MIX/
FUNC/NORM mode is turned on, the Instructor
can make corrections while the student has control).
When the switch is released the Instructor regains
control. This is very useful if the student gets the
aircraft into an undesirable situation.
● Setting data are stored to model data.
● Student rate can be adjusted at MIX/FUNC/
● Student rate can be adjusted at MIX/FUNC/
NORM mode.
● Activated student channels can be selected
by switches.
NOTE: This trainer system can be used in the
following manner;
1. With the T14SG transmitter and a conventional
transmitter, if the channel order is different,
it is necessary to match the channel order
before using this function.
You can select the channel of input data
from student's transmitter in the "FUNC" or
"MIX" mode.
2. When the T14SG is used as the instructor’s
transmitter, set the modulation mode of the
student’s transmitter to PPM.
If being used as the student, T14SG can be
connected to the instructor's transmitter which
the PPM mode as the student's modulation
mode is required. T14SG always sends PPM
mode signal from the trainer jack.
3. Be sure that all channels work correctly in
both transmitters before flying.
Corresponding types of transmitters and trainer mode settings:
Types of transmitters
Instructor's transmitter settings
Student's transmitter settings
System Type
Trainer setting
System Type
Trainer setting
Trainer Cords
Instructor
Student
Mod. mode
CH mode
Mod. mode
CH mode
Mod. mode
T14SG/T18MZ T14SG/T18MZ
Arbitrary
14CH/16CH
Arbitrary
14CH/16CH
-
T12FG (FUTM4405)
and 9C (FUTM4415)
Trainer Cords
T14SG
T14MZ, FX-40,
T12Z, T12FG,
FX-30
Arbitrary
12CH
PCM-G3
2.4G
12CH
PPM
T14SG
T8FG, FX-20
Arbitrary
12CH
FASST-MLT2
-
-
8CH
FASST-MULT
T14SG
T10C, T9C,
T7C,T6EX,
T4EX
Arbitrary
8CH
PPM
-
-
T12FG (FUTM4405)
T14SG
T10CG,T7C
Arbitrary
8CH
Arbitrary
-
-
T12FG (FUTM4405)
T14SG
T8J,T6J
Arbitrary
8CH
Arbitrary
-
-
T12FG (FUTM4405)
and 9C (FUTM4415)
Trainer Cords
T14MZ, FX-40,
T12Z, T12FG,
FX-30
T14SG
Arbitrary
12CH
Arbitrary
12CH
-
T8FG, FX-20
T14SG
Arbitrary
12CH
Arbitrary
12CH
-
T10C, T10CG,
T9C, T7C,
T7C,T8J
T14SG
Arbitrary
-
Arbitrary
8CH
-