Spektrum SPM9645 User Manual
en
3
SPM9645 inStRuctionS
Always use DSMX
®
remote receivers with DSMX main receivers.
connecting new Remote Receivers
1. Connect the 24” Remote Receiver Extension
1. Connect the 24” Remote Receiver Extension
to the main receiver and remote receiver.
2. Power off the transmitter.
3. Install the bind plug in the receiver Bind port.
4. Power on the receiver. The receiver LED flashes rapidly.
5. Move the transmitter controls to the failsafe positions (flight controls:
3. Install the bind plug in the receiver Bind port.
4. Power on the receiver. The receiver LED flashes rapidly.
5. Move the transmitter controls to the failsafe positions (flight controls:
rudder, elevator and aileron centered) and low throttle position.
6. Power on the transmitter while holding the transmitter bind button or switch.
7. The receiver LED turns solid when the receiver binds to the transmitter.
8. Remove the bind plug from the receiver and power off the receiver.
You will need to bind your transmitter and receiver any time you add a new
7. The receiver LED turns solid when the receiver binds to the transmitter.
8. Remove the bind plug from the receiver and power off the receiver.
You will need to bind your transmitter and receiver any time you add a new
remote receiver to the system.