Microchip Technology AC162051 Data Sheet
2002 Microchip Technology Inc.
DS51291A-page 1
MPLAB
®
ICD HEADER (AC162051)
12
Information Sheet
Introduction
The MPLAB
®
ICD Header (Part Number AC162051) provides a means of
connecting the MPLAB ICD 2 Module to a target board that does not
incorporate a 6-wire modular connection into its design. The board is
designed for 40-pin devices supported by MPLAB ICD 2. Please see the
README.ID2 in the MPLAB IDE software for specific details on devices
supported.
incorporate a 6-wire modular connection into its design. The board is
designed for 40-pin devices supported by MPLAB ICD 2. Please see the
README.ID2 in the MPLAB IDE software for specific details on devices
supported.
The MPLAB ICD 2 Module connects to the MPLAB ICD Header via a 9-inch
modular cable. For in-circuit debugging, insert a 40-pin PICmicro
modular cable. For in-circuit debugging, insert a 40-pin PICmicro
®
into the
MPLAB ICD Header, then insert the header board into a 28-pin or 40-pin DIP
socket on the target application. The 28-pin connector on the underside
allows debugging of a 28-pin device using a 40-pin device as the master (U2).
Pin connections translate a 40-pin device to the 28-pin device.
socket on the target application. The 28-pin connector on the underside
allows debugging of a 28-pin device using a 40-pin device as the master (U2).
Pin connections translate a 40-pin device to the 28-pin device.
Figure 1: MPLAB ICD 2 Module Connection with Header
MPLAB ICD 2 Module
Power in
Target Application
Target Socket
MPLAB ICD Header
U2