Keba 86.875 Electric Cars KEBA 86.875 Electric Cars N/A Silver, Grey Silver, Grey 86.875 Data Sheet
Product codes
86.875
KeContact P20
Installation
Installation
manual, Version: 1.41 / Article no.: 90064 19
© KEBA 2012-2013
4.2 Preparing the cable insertion
There are two possibilities available for the cable insertion:
Cable insertion from above (surface cable routing)
Cable insertion from behind (flush-type cable routing)
Preparations
►
Remove the connector panel cover (see Chapter "Removing/mounting the cable panel
cover").
cover").
►
Populate the charging station with the required cable glands or seals (if an open
cable insertion opening is not used any more).
cable insertion opening is not used any more).
Breaking out the cable insertion openings
Breaking out the cable insertion openings
►
Place the housing on on a stable support
pad and use a hammer and flathead
screwdriver to carefully break out the
required cable insertion openings.
pad and use a hammer and flathead
screwdriver to carefully break out the
required cable insertion openings.
►
Then insert the corresponding
feedthroughs (cable glands or double-
membrane seals)
feedthroughs (cable glands or double-
membrane seals)