Keba 86.875 Electric Cars KEBA 86.875 Electric Cars N/A Silver, Grey Silver, Grey 86.875 Data Sheet

KeContact P20 

 

 manual, Version: 1.41 / Article no.: 90064 41 

© KEBA 2012-2013 

 

 
Programming the RFID master card 
 

 

The authorization by an RFID master card is necessary for the programming. The 
programming mode can be activated and deactivated using the RFID master card.

 

The first RFID card that is detected by the charging station will automatically be 
stored as the master card. 

 

Hold the RFID master card to be programmed in front of the RFID sensor and wait for 
the signal tone. 
 
The RFID master card is now programmed. Keep this card in a safe place. 

 
 
Programming RFID user cards 

Hold the RFID master card in front of the RFID sensor and wait for the signal tone. 

Hold the new RFID user card in front of the RFID sensor within 5 seconds and wait for 
the signal tone. 

To confirm, hold the RFID master card in front of the RFID sensor again within 5 
seconds and wait for the signal tone. 
 
The RFID user card is now programmed. 

 
 
Deleting all RFID cards from memory 

Remove the housing cover and open the connector panel cover of the charging station. 

Press the [Service button] for 5 seconds. 
 
All saved RFID cards (including the RFID master card) are now deleted. 

Now start again with the programming of the RFID master card.