Digitus DN-13020 User Manual
25
6. The Server’s Web Pages
6.1 Introduction
The Server runs the http server, httpd on TCP port: 80. Users may use the web pages
to see the Server’s system status and configure the Server.
to see the Server’s system status and configure the Server.
6.2 Using the Server’s Web Pages
6.2.1 Displaying Server Status
Click on the “STATUS” icon to see system status, network status and Wireless
Status(only for wireless model).
Status(only for wireless model).
6.2.2 Setting up Server Configuration
To set up the Server configuration, click on the “CONFIG” icon ad then the
system will request user to enter administrator (default: admin) and password
(default: admin) to login.
system will request user to enter administrator (default: admin) and password
(default: admin) to login.
General Configuration
Server Information: You have to set the Server Name, which is the name
to represent the Server.
Storage Access Mode: Set storage access mode as server or NetUSB
mode.
TCP/IP: You have to set the Server’s TCP/IP configuration to connect
TCP/IP network. Please see Chapter 3 Basic Installation for more details.
UPnP Setting: Enable or disable the UPnP function.
File Server Codepage: Setup language for file server code.
Administrator:
You can change administrator name and password. If you forgot
administrator name and password, you must perform Restore Factory
Default action by plugging in the power adaptor while pressing the Init button.
Please refer to the chapter “Restore Factory Defaults”.
administrator name and password, you must perform Restore Factory
Default action by plugging in the power adaptor while pressing the Init button.
Please refer to the chapter “Restore Factory Defaults”.
Administrator: enter your desired administrator name.
New Password: enter your desired password.
Re-type Password: re-confirm the password.
Maintenance
If you want to restore factory default values of the Server or upgrade new
firmware, you can use the Maintenance tool.
firmware, you can use the Maintenance tool.
Restart: click this button to restart (reboot) the Server.
Factory Default: click this button, the Server will restore factory
default values.
Firmware Upgrade: click Browse to find the firmware file
to be upgraded. Click Upload to upload the firmware into the Server.