ALLNET DUAL-WAN ROUTER ALL-VPN10 ALL-VPN10 Data Sheet

Product codes

ALL-VPN10

VPN/Firewall WLAN-N WAN Router

segment configuration; the Internet will then be directly accessible. In other words, if there are already different

IP segment groups in the Intranet, the Internet is still accessible without making any changes to internal PCs.

Users can make changes according to their actual network structure.

6.1.3 WAN Settings

WAN Setting：

Interface: An indication of which port is connected.

Connection Type: Obtain an IP automatically, Static IP connection, PPPoE (Point-to-Point Protocol over Ethernet), PPTP

(Point-to-Point Tunneling Protocol) or Transparent Bridge.

Config.: A modification in an advanced configuration: Click Edit to enter the advanced configuration page.

Obtain an Automatic IP automatically:

This mode is often used in the connection mode to obtain an automatic DHCP IP. This is the device system default

connection mode. It is a connection mode in which DHCP clients obtain an IP address automatically. If having a

different connection mode, please refer to the following introduction for selection of appropriate configurations. Users

can also set up their own DNS IP address. Check the options and input the user-defined DNS IP addresses.