TP-LINK 54Mbps Pocked-Sized Wirerless Print Server TL-WPS510U Data Sheet
Product codes
TL-WPS510U
30
The print server provides three kind of security settings: WEP (64/128bit), WPA (TKIP/AES (CCMP)) and
WPA2 (TKIP/AES (CCMP)) to fit an existing security setting of wireless network.
WPA2 (TKIP/AES (CCMP)) to fit an existing security setting of wireless network.
WPA-PSK and WPA2-PSK support Infrastructure mode only.
And the following site survey table will provide a list of existing wireless network. You can choose one to
join.
5.4.3 TCP/IP Setup:
1) Click
Setup, it then appears the sub-menu.
2) Click
TCP/IP, it then as shown in the following picture.
¾
DHCP/BOOTP: This option allows you to select DHCP/ BOOTP option. If there is a DHCP/BOOTP
server on your network. This option allows the print server to obtain IP-related settings automatically
from your DHCP server.
from your DHCP server.
¾
IP Address: This option allows you to input IP address from the print server. The IP address must
meet the IP addressing requirements of the network segment.
)
Note:
On the TCP/IP Setup screen, specify a fixed IP address is highly recommended.