Kathrein 20210165 Data Sheet
73
Recording archive (playing back/editing recordings)
Copying to USB data carriers (or NAS)
The connected USB data carrier
1)
must be “FAT/FAT 32” formatted.
Successful USB data carrier initialisation is indicated by the “USB” and “HDD”
symbols on the front display. If both symbols are lit, the data carrier can be used.
symbols on the front display. If both symbols are lit, the data carrier can be used.
1)
Tested only with hard disks from the Kathrein product range e.g. UFZ 111 (see also: www.kathrein.de → Service →
FAQs)
FAQs)
Use the
buttons to select “Copy to USB Device” and confi rm with the
button. The following
on-screen display appears (example):
Select the desired storage location using
the
buttons.
A USB storage device or a partition with insuffi cient storage capacity is marked
red. It is not possible to copy the selected recording(s) to this storage location.
Select a storage location with suffi cient space (displayed in black).
red. It is not possible to copy the selected recording(s) to this storage location.
Select a storage location with suffi cient space (displayed in black).
Now press the
button to start the copying operation. The copying progress is shown in the channel
information (called up using the
button from the TV picture), see example screenshot below.
For details on how to set up an NAS
and use this with the UFS 925, see
the “Media centre” section.
and use this with the UFS 925, see
the “Media centre” section.
Tip!