Kathrein 20210165 Data Sheet
38
Transmission channel for Tuner 1:
Select a free available transmission channel (SCR 0 - SCR 3).
Transmission channel for Tuner 2:
Select a free available transmission channel (SCR 0 - SCR 3).
When you have completed all settings for the satellite, press the
(green) button.
The following on-screen display appears:
Test Transponder:
Select the “Test Transponder” fi eld. Here you can select a transponder for checking whether your settings
are correct using the signal strength bar and signal quality bar.
are correct using the signal strength bar and signal quality bar.
If no connection can be established to the single-cable system, check your settings (frequency and
transmission channel) and if necessary call for expert help.
transmission channel) and if necessary call for expert help.
When you have completed all settings for the satellite, press the
(green) button.
The receiver will automatically display the screen for the channel search. Continue the fi rst installation
with the “Channel Search” section.
with the “Channel Search” section.
Connection and set-up