Bomann TSG 707 770770 Data Sheet
Product codes
770770
normal for a smal l amount of wate r to come out of the salt container.
It is
1. The salt container must only be refilled when the salt warning light in the control panel comes on.
Depending on how fully the salt dissolves, the salt warning light may still be on even though the
salt container is filled.
If there is no salt warning light in the con trol panel (For some Models),you can judge when to loa d
the salt into the softener by the cycles that the dishwasher had run.
salt container is filled.
If there is no salt warning light in the con trol panel (For some Models),you can judge when to loa d
the salt into the softener by the cycles that the dishwasher had run.
2. If there are spills of the salt, a soak or a rapid program should be run to remove the excess salt.
Always use salt int ended for use with dishwasher.
The salt c ontain er is located beneath the basket and should be filled as follows:
The salt c ontain er is located beneath the basket and should be filled as follows:
Attention!
Only use salt spe cif ically desi gne d for u se in dis hwashers! All other types of
salt not speci fically de sig ned fo r use in a dishwas her, es peciall y table sal t, will
damage the w ater sof tener. i n c ase of damages c aused by the use of unsuitab le
salt t he ma nuf act urer does not give any wa rranty nor is liable for any cause d
damages.
salt not speci fically de sig ned fo r use in a dishwas her, es peciall y table sal t, will
damage the w ater sof tener. i n c ase of damages c aused by the use of unsuitab le
salt t he ma nuf act urer does not give any wa rranty nor is liable for any cause d
damages.
Only fil l wi th salt just b efore starting one of the co mp let e washing p rogrammes.
This wi ll prevent any g rains of s alt or salty wate r, which ma y have been split,
remaining of the bottom of the ma chin e for any per iod of tim e, which may cause
corrosi on.
This wi ll prevent any g rains of s alt or salty wate r, which ma y have been split,
remaining of the bottom of the ma chin e for any per iod of tim e, which may cause
corrosi on.
4
A
Remove the basket and then unscrew and remove the cap from the salt container.
B
Before first wash, add 1lt. of water in the salt container of your machine.
C
Place the end of the funnel (supplied) into the hole and introduce about 1kg of salt.
D
After fil ling the container , screw the cap tightly back clockwise.
E
Usually, the salt warning light will be cea se to be illu minated w ithi n 2-6 day s after the salt container has been fille d with
salt.
F
Immediately after filling the salt into the salt container, a washing programme should be started
Otherwise filter system, pump or other important parts of the machine may be damaged by salty
water. It is out of warranty.
If your model have
water softener, you may skip this section.
no
Step 1: Enter the status of salt adjustment
Adjusting Salt Consumption
Close the door, within 60second after power on, press Start/Pause button
for 5 seconds to enter setting mode.
Digital display stalls "H *", the controller factory default H6
for 5 seconds to enter setting mode.
Digital display stalls "H *", the controller factory default H6