4d Systems 0.96" micro OLED Display $OLED-96-G2 uOLED-96-G2 Data Sheet
Product codes
uOLED-96-G2
4D SYSTEMS uOLED-96G2
© 2014 4D SYSTEMS Page 8 of 18 www.4dsystems.com.au
mi
cr
oO
LE
D
GO
LDE
LO
X
DI
SP
LA
Y
5. PmmC/Firmware Programming
The GOLDELOX processor on the uOLED-96G2
module can be re-programmed with the latest
PmmC configuration for updates and future
proofing. The chip-level configuration is available
as a PmmC (Personality-module-micro-Code) file
and the programming must be performed over the
serial interface. The chip-resident internal 4DGL
functions are part of the GOLDELOX PmmC
configuration file so please check regularly for the
latest updates and enhancements.
It is recommended that the uOLED-96G2 display
module be socketed on the application board so
that it can be easily removed for PmmC
programming.
The PmmC file is programmed into the device with
the aid of Workshop 4, the 4D Systems IDE
software (See Section 10). To provide a link
between the PC and the ICSP interface, a specific
4D Programming Cable is required and is available
from 4D Systems.
Using a non-4D programming interface could
damage your display, and void your Warranty.
6. Module Features
The uOLED-96G2 module is designed to
accommodate most applications. Some of the
main features of the module are listed below.
Display – 0.96” PMOLED
6.1.
The uOLED-96G2 is equipped with a full colour
PMOLED screen. Some of the features of the
screen are:
• Screen Size: 0.96” diagonal
• 96 x 64 Resolution PMOLED display
• Screen Dimensions: 25.7 x 22.2mm.
• Active Area: 20.1 x 13.4mm
• 65K true to life colours
• Brightness: 100 cd/m2
• Contrast Ratio: 5000:1
• Viewing Angle: > 160 degrees
• No Back lighting
Note: The Displays used are the highest rated
‘Grade A’ Displays, which allow for 0-4 defective
pixels. A defective pixel could be solid Black
(Dead), White, Red, Green or Blue.
‘Grade A’ Displays, which allow for 0-4 defective
pixels. A defective pixel could be solid Black
(Dead), White, Red, Green or Blue.
GOLDELOX Processor
6.2.
The module is designed around the GOLDELOX
Graphics Processor from 4D-Labs.
The GOLDELOX is a custom embedded graphics
processor designed to interface with many popular
OLED and LCD display panels. Powerful graphics,
text, image, animation and countless more
features are built right inside the chip. It offers a
simple plug-n-play interface to many 8bit 80-Series
colour LCD and OLED displays.
The chip is designed to work with minimal design
effort and all of the data and control signals are
provided by the chip to interface directly to the
display. Simply choose your display and interface it