TP-LINK JetStream TL-SG1024DE Data Sheet

 

 

Figure 4-2 IP Address Setting 

The following entries are displayed on this screen: 



IP Address Setting   

Allows you to enable or disable the switch to serve as DHCP 
client. If DHCP client is enabled, the switch will obtain the IP 
address, subnet mask and default gateway from the DHCP server 
automatically; otherwise, these three items should be configured 
manually. By default, it is disabled. 

Specify the system IP address of the switch. The default system IP 
address is 192.168.0.1 and you can change it appropriate to your 
needs. The switch IP address must be compliant with the subnet 
layout. 

Enter the subnet mask of the switch. Subnet mask is an address 
code that determines the size of the network. By default, the 
switch uses 255.255.255.0 as the subnet mask. 

Enter the default gateway of the switch. Gateway serves as the 
default destination where the packet is to be forwarded when its 
destination IP address is not within the switch’s subnet. 

1.  The switch only possesses an IP address. The IP address newly configured will replace the 

original one. 

2.  Changing the IP address to a different IP segment will interrupt the network communication, so 

please keep the new IP address in the same IP segment with the local network. 

On this page you can modify the username and password in order to refuse illegal users.   

Choose the menu System→User Account to load the following page.   

9