TP-LINK JetStream TL-SG1024DE Data Sheet

 



 

For the newly joined member ports in a trunk group, their default setting of Port setting 

(Speed and Duplex,  Flow Control),  QoS will be configured the same as that of the first 

member port in the trunk group. 



 

The trunk member ports cannot be set as mirroring port. 



 

Before setting the trunk, its member ports should be divided to the same VLAN, and have the 

same PVID and drop the untagged packet rule. Change of the trunk setting will not affect the 

VLAN setting.   

If the port trunk is needed, you are suggested to configure the port trunk function here before 

configuring the other functions for the member ports. 

On this page, you can configure and view the information of the trunk group of the switch. 

Choose the menu System→Switching→Port Trunk to load the following page. 

 

Figure 4-6 Trunk Group Setting 

Here you can configure and view the port parameters. 



Select an identified number for the trunk group from the 
drop-down list. 

13