Silex Technology Silex SX-DS-4000U2 USB 2.0 Gigabit high-performance network server SX-DS-4000U2 User Manual
Product codes
SX-DS-4000U2
! Prin
t Server F
unctionalit
y !
Step-by-step Guide for the Print Server Functionality
Congratulations! You have purchased a high quality product from silex technology. It enables you to
network print and scan from your USB and Multi-Function printer. This quick setup guide helps you
to configure the special Print Server Function. If you want to learn how to setup network scanning,
please refer to the separate USB Device Server Setup Guide included in this package.
network print and scan from your USB and Multi-Function printer. This quick setup guide helps you
to configure the special Print Server Function. If you want to learn how to setup network scanning,
please refer to the separate USB Device Server Setup Guide included in this package.
Before you begin, please install the following: Printer drivers, SX-Virtual Link* and perform the general
setup of the device server (Please refer to the separate Device Server Setup Guide).
setup of the device server (Please refer to the separate Device Server Setup Guide).
Step 1
(1.) Start SX Virtual Link and select
the printer you would like to use
for the Print Server Functionality
(auto-connection).
(2.) Make a right click and choose
the option “Properties” or click
on the button “Property Option”
in the lower left corner.
(1.) Start SX Virtual Link and select
the printer you would like to use
for the Print Server Functionality
(auto-connection).
(2.) Make a right click and choose
the option “Properties” or click
on the button “Property Option”
in the lower left corner.
Step 2
(1.) Click on “Enable auto connect”,
(2.) select “Connect automatically”
and then
(3.) click on “Confirm”.
(1.) Click on “Enable auto connect”,
(2.) select “Connect automatically”
and then
(3.) click on “Confirm”.
Step 3
(1.) Please confirm that the right
printer is selected and
(2.) click on “OK”.
(1.) Please confirm that the right
printer is selected and
(2.) click on “OK”.
1.
2.
2.
1.
2.
2.
1.
3.
2.
1.
3.
2.
2.
1.
2.
1.